2016 Audi Q2 problems
The 2016 Audi Q2 was sold with 1 engine and 1 gearbox that we have documented: the DSG7 DQ200 gearbox and the 2.0 TDI. The DSG7 DQ200 gearbox has serious faults that affect the cars of that year. The safest option is the 2.0 TDI (verdict “Buy”).
2016 Audi Q2 score: good reliability
Calculated using only 4 documented faults and their sources: the most serious and frequent faults weigh more. How it is calculated
- Engine7.72 faults
- Gearbox7.3Manual: no faults · DSG7 DQ200: 4.6
- Suspension8.8Technical inspection (ITV) only: 0.5 times the defects normal for its age
- Brakes8.3Technical inspection (ITV) only: 0.7 times the defects normal for its age
- Tyres and wheels10.0No documented faults
- Steering8.8Technical inspection (ITV) only: 0.5 times the defects normal for its age
- Electrical system10.0No documented faults
- Headlights and lights8.5Technical inspection (ITV) only: 0.6 times the defects normal for its age
- Electronics and infotainment10.0No documented faults
- Climate control10.0No documented faults
- Bodywork and interior7.4Technical inspection (ITV) only: 1.0 times the defects normal for its age
- Airbags and safety10.0No documented faults
DSG7 DQ200 gearbox in the 2016 Audi Q2
Names: 1.0 TFSI S tronic · 1.4 TFSI S tronic
- With caution
DSG7 DQ200 0CW (since 2013)
· 0CW
It improves on the reliability of the 0AM, but does not eliminate its design weak points: it is still the same dry-clutch and mechatronic family, so you should carry out the same checks (history, stored fault codes, test drive) before buying.[1][2][3]
Faults that affect 2016 cars
- High severityFrequency: Very frequentElectronicsMechatronic unit failure: pressure accumulator, pump and cracked housingYes: the mechatronic unit is the DQ200's most cited weak point. Its pressure accumulator and hydraulic pump can fail because of a housing design defect, with fault warnings, limp mode or loss of drive; Volkswagen has acknowledged the problem with service actions and software updates.Repair (garage): €600–€2,200
- Medium severityFrequency: CommonClutchPremature dry clutch wear and judder when drivingYes: the DQ200's dry clutch wears out sooner than a wet one, especially in stop-start urban traffic. It warns of its condition with judder or jerking when pulling away, slipping when accelerating and, in advanced cases, a burning smell; specialists put its service life at between 120,000 and 180,000 km depending on use.Repair (garage): €500–€1,100Appears at around 120,000 km
2.0 TDI engine in the 2016 Audi Q2
- Buy
2.0 TDI EA288 (from 2012)
110–240 hp · CRBC, CUNA, CUPA, CRLB, CRMB, DFEA, DFEB, DFFA, DFGA, DDAA, DFCA, CUAA
Caradisiac picks it as the best diesel in the third-generation Audi A3. Its most cited fault is coolant loss from water pump leaks, easy to keep an eye on before buying.[5]
Faults that affect 2016 cars
- Medium severityFrequency: CommonCoolingCoolant loss from the water pump or the coolersMany 2.0 TDI engines lose coolant. On the 150 hp EA288 the water pump is usually the culprit and, more rarely, the cylinder head; on the 140 hp EA189 the typical causes are the oil cooler or the EGR cooler.
- Low severityFrequency: RareTurboHissing when accelerating from damaged hoses or intercooler on the Transporter T6 2.0 TDIOn the Transporter T6 2.0 TDI (2015-2019) a hissing sound can be heard when accelerating, caused by loose or damaged hoses or a crack in the intercooler. Often there is no loss of power and no warning light; oil stains reveal the crack.
Buying a 2016 Audi Q2?
We will put you in touch with a partner only if you authorise it in the form.
Frequently asked questions
Is the 2016 Audi Q2 reliable?
The 2016 Audi Q2 was sold with 1 engine and 1 gearbox that we have documented: the DSG7 DQ200 gearbox and the 2.0 TDI. The DSG7 DQ200 gearbox has serious faults that affect the cars of that year. The safest option is the 2.0 TDI (verdict “Buy”).
What is the best year for the Audi Q2?
According to our score, the best are 2026, 2025, 2024 and 3 other years with the same score (7.8/10). The year with the worst score is 2017 (6.8/10). Each year's score counts only the engines sold that year and the faults that affect those cars.
What faults does the 2016 Audi Q2 have?
The most important ones documented for 2016 cars are: mechatronic unit failure: pressure accumulator, pump and cracked housing (DSG7 DQ200 gearbox, high severity), premature dry clutch wear and judder when driving (DSG7 DQ200 gearbox, medium severity), coolant loss from the water pump or the coolers (2.0 TDI, medium severity) and hissing when accelerating from damaged hoses or intercooler on the Transporter T6 2.0 TDI (2.0 TDI, low severity).
Own a 2016 Audi Q2? Tell us what faults you have had and at how many kilometres. Report your fault.
Sources
Every fact on this page links to its source. If you find an error, let us know.
- DSG7 DQ200: Guía Técnica Definitiva (P17BF, Mecatrónica y Soluciones)STR Performance · Technical documentation · consulted 26 September 2026 · in Spanish
- VW, Skoda & Seat DSG Probleme: alle 6 und 7-Gang DQ GetriebeCarwiki · Technical documentation · consulted 26 September 2026 · in German
- Reliability of the 7-speed DSG dual-clutch transmission in used cars: our VAG buying guideEuro Racing Parts · Technical documentation · consulted 26 September 2026
- VW EA288Wikipedia (alemán) · Other source · consulted 26 September 2026 · in German
- Fiabilité de l'Audi A3 (3e génération) : la maxi-fiche occasion de CaradisiacCaradisiac · Motoring press · published 19 December 2018 · consulted 26 September 2026 · in French