2007 Mazda 3 problems

• 1.6 HDi 110 16V DPF (DV6TED4, 2004-2011)

  109–110 hp · DV6TED4, 9HY, 9HZ

  It is the version with the most complaints in the family (turbo, injection, EGR, DPF and dual-mass flywheel). It is only worth it with demonstrable maintenance and, if the turbo has already been replaced, with the complete cleaning procedure documented on the invoice.^[3][4][5]

  With caution

Faults that affect 2007 cars

• High severityFrequency: Very frequentTurboTurbo failure through lack of lubrication (carbon deposits and union filter)On the 16-valve 1.6 HDi/TDCi engines (2004-2011) the turbo can seize because carbon deposits from the oil clog the mesh filter in the union that feeds it. It is a serious, repeat fault: if only the turbo is replaced without cleaning the circuit, it fails again.Repair (garage): €700–€1,050
• High severityFrequency: Very frequentTimingTiming belt failure and premature wearOn the 8-valve 1.6 HDi/e-HDi 112/115 built between October 2010 and September 2011 the belt could break and leave the car stranded. PSA covered the repair and in 2014 preventively replaced the belt and crankshaft sprocket on those that had passed 120,000 km.
• Medium severityFrequency: CommonInjectionLeaks at the injector washers and carbon build-up in the cylinder headIt is common for the copper washers of the 1.6 HDi injectors to stop sealing: the engine blows gases, carbon forms around the injector and soot gets into the oil. It is cheap to repair, but if left it contaminates the oil and is one of the causes of turbo failure.Repair (garage): €110–€310
• Medium severityFrequency: CommonEmissions controlAdditive-fed particulate filter (Eolys cerine): depleted additive and cloggingThe DPF on the 1.6 HDi and BlueHDi works with an additive (cerine) that runs out at 80,000-120,000 km and has to be topped up for around €100-120 (price in Spain). With a lot of town use the filter clogs and the warning appears; if it is left, a new DPF costs around €1,500.Repair (garage): €100–€1,500Appears at around 80,000 km
• Medium severityFrequency: CommonEmissions controlDirty EGR valve and EGR cooler leaksThe 1.6 HDi EGR valve gets dirty easily, especially in town use, and causes jerking and stalling at idle. On the 8V engines the EGR cooler also fails, consuming coolant with no visible leaks.

• 2.3 MZR DISI Turbo 256-260 hp (L3-VDT, 2005-2009)

  256–263 hp · L3-VDT

  This is the series most affected by chain problems according to Wikipedia; it is only worth considering with an oil service history and a timing check.^[6][8]

  With caution

Faults that affect 2007 cars

• Critical severityFrequency: CommonTimingTiming chain stretch and VVT actuator failure on the 2.3 DISI TurboThe 2.3 DISI Turbo's timing chain and its tensioner wear sooner than expected, especially on pre-2010 units: a rattle when cold is the warning, and if it fails it can damage the engine.Appears at around 100,000 km
• High severityFrequency: CommonTurboPremature turbocharger wear from poor lubrication on the 2.3 DISI TurboThe 2.3 DISI Turbo's turbo, with faults documented mainly on the CX-7, wears out through poor lubrication and causes blue smoke, loss of power and oil consumption; replacing it costs around €2,200 in Spain.Repair (garage): €2,200Appears at around 100,000 km
• Medium severityFrequency: OccasionalLubricationOil consumption and sludge in the 2.3 DISI Turbo engineThe 2.3 DISI Turbo can burn oil and build up sludge if service intervals are stretched; the sludge blocks the turbo's passages and speeds up wear on the turbo and the timing.

• 2.0 MZR-CD 105-143 (RF, 2005-2010, with DPF)

  105–143 hp · RF

  The particulate filter adds sensitivity to short journeys (incomplete regeneration and oil dilution), documented by fiches-auto.fr and gebrauchtwagenberater.de on the Mazda6 and Mazda3 of these years; we have found no equivalent reports for the Mazda5 with this engine, although it shares the same design.^{[10][11][12][13]}

  With caution

Faults that affect 2007 cars

• High severityFrequency: CommonLubricationOil dilution from leaking injector seals and DPF regenerationsOn the 2.0 and 2.2 MZR-CD, injector seals that age badly and incomplete particulate filter regenerations on short journeys can let unburnt diesel into the sump, diluting the oil and leaving the engine with less lubrication.
• High severityFrequency: OccasionalTurboTurbocharger wear or failureThe MZR-CD's variable-geometry turbo appears among the faults cited by Mazda6 and Mazda3 owners, with cases of whistling, loss of boost pressure and, in one documented case, a repair of over €3,600 in France; it tends to be made worse if the oil has previously been diluted.
• Medium severityFrequency: CommonIntakeCarbon on the injectors, EGR valve and intakeUrban use and short journeys encourage carbon to build up on the injectors, EGR valve and intake of the MZR-CD, with loss of power and jerking; documented on the Mazda6 and Mazda3, on both the 2.0 and the 2.2.

• 1.4 MZR 84 hp (Mazda3 BK, 2003-2009)

  84 hp

  Gebrauchtwagenberater.de rates the reliability of petrol Mazda3 BK models well and cites no faults specific to the 1.4; fiches-auto.fr has no testimonials for this version yet, so the data is scarce.^[10][15]

  Buy

• 1.6 MZR 105 hp (Z6 / ZM-DE, 2003-2013)

  105 hp · Z6, ZM-DE

  It is the version with the best record: gebrauchtwagenberater.de considers petrol Mazda3 models reliable, the fiches-auto.fr page for the BL lists no faults in its 12 testimonials for the 1.6, and the one for the BK counts only a few, mostly sensors, among 28 testimonials.^{[10][15][16][17]}

  Buy

• 2.0 MZR 140-160 hp (LF-DE, LF-VE, 2003-2015)

  140–160 hp · LF-DE, LF-VE

  Gebrauchtwagenberater.de considers the petrol engines of the Mazda3 and Mazda6 reliable and attributes no faults specific to the 2.0; fiches-auto.fr adds isolated cases of oil consumption (3 among 17 testimonials in the Mazda3 BK and 2 among 19 in the Mazda6 GG) and of sensors, and a damaged big-end bearing at around 50,000 km.^{[10][11][12][15]}

  Buy

Faults that affect 2007 cars

• Critical severityFrequency: OccasionalCylinder head and blockBig-end bearing damage in the 2.3 MZR, with isolated cases in the 1.8 and 2.0Gebrauchtwagenberater.de cites big-end bearing damage as a known weak point of the 2.3 MZR of the Mazda6 GG, and fiches-auto.fr adds two isolated cases: a Mazda6 1.8 with a blown engine and a Mazda3 2.0 with a damaged big-end bearing at around 50,000 km.
• Low severityFrequency: OccasionalLubricationOil consumption in the 1.3, 1.6 and 2.0 MZR at high mileageIn the smaller petrol MZR engines, oil use appears mainly at high mileage: gebrauchtwagenberater.de places it in the Mazda2 DE from around 150,000-200,000 km, and fiches-auto.fr records isolated cases in the 2.0 of the Mazda3 and Mazda6 and in the 1.3 of the Mazda2.Appears at around 150,000 km
• Low severityFrequency: OccasionalIgnitionMisfires from spark plugs and ignition coils in petrol MZR enginesSpark plugs appear among the fault points of the Mazda2 DE in the ADAC statistics cited by gebrauchtwagenberater.de, and fiches-auto.fr attributes the misfires of the Mazda3 1.6 to coils, spark plugs or sensors.

• Medium severityFrequency: OccasionalBodywork and interiorFragile paint and bodywork corrosion on the Mazda 3 (BK)According to the reports gathered by fiches-auto.fr, the paint on the first-generation Mazda 3 is fragile and corrosion appears: it is the most cited non-mechanical fault in the listing (12 cases out of 140 reports).
• Medium severityFrequency: OccasionalElectrical systemStarter motor solenoid fault on the Mazda 3 (BK) that prevents startingTwo German sources, gebrauchtwagenberater.de and Auto Zeitung, indicate that the starter motor is a failure point on the Mazda 3 of this generation, with the starter solenoid specifically cited for the BK.
• Medium severityFrequency: RareSuspensionWear of shock absorbers, bushes and wheel bearings on the Mazda 3 (BK)According to the reports gathered by fiches-auto.fr, worn bearings, shock absorbers and bushes with noises and vibrations are cited on the Mazda 3 BK (5 cases), as well as anti-roll bar problems (4 cases).
• Medium severityFrequency: RareSteeringElectric power steering fault on the Mazda 3 (BK) caused by a weak battery or contactsGebrauchtwagenberater.de notes that the Mazda 3 BK's electric power steering can stop working if the battery is weak or there is a poor contact, making the steering heavy when manoeuvring.
• Low severityFrequency: RareElectronics and infotainmentRadio and dashboard display faults on the Mazda 3 (BK)According to the reports gathered by fiches-auto.fr, some first-generation Mazda 3 cars suffer radio faults or loss of the dashboard display (5 cases out of 140 reports).
• Low severityFrequency: RareBodywork and interiorMazda 3 (BK) tailgate struts that break from corrosionGebrauchtwagenberater.de records, citing the KBA, a recall because corrosion can break the tailgate struts on Mazda 3 BKs built from 2007 onwards.